close
1999 Honda NX 250 Motorcycle 1/4 mile Drag Racing timeslip specs 0-60
| 1/4 Mile ET: | 13.928 |
| 1/4 Mile MPH: | 102.500 |
| 1/8 Mile ET: | 0.000 |
| 1/8 Mile MPH: | 0.000 |
| 0-60 Foot ET: | 0.000 |
| Temperature F: | 90.0 |
| Density Altitude (DA): | DA Calculator |
| Timeslip Scan: | |
| Car Make: | Honda |
| Car Model: | NX 250 |
| Car Type: | Motorcycle |
| Car Year: | 1999 |
| Driver: | justin maddox |
| E-Mail: | Click HERE |
| Videos: | NX-250 Videos |
|
|
輪上馬力試算 (以NX250官方濕重133KG+車手65KG來推估...約436lb)
http://www.dragtimes.com/horsepower-et-trap-speed-calculator.php?et=13.928&trap=102.500&weight=0
大概是34.27HP
看來當初欣成講說他們的比賽車可以160KPH就沒有豪洨
不過輪上馬力也要有像欣成搞出35P才有辦法嘿~~~
(然後車手不能太重....我的體重會讓出力少10%~~~嗚嗚嗚~~~)
不過看起來....這台NX250用的化油器很屌唷~~~台灣應該沒人用過
另外...補一下NX250 0~100KPH 6.6sec
http://motoprofi.com/motospecspictures/honda/nx_250-1988.htm
| TECHNICAL SPECIFICATION | |
|---|---|
| Model ID | |
| Manufacturer (Make) | Honda |
| Model Name | NX 250 |
| Year | 1988 |
| Category(class) | Enduro |
| Engine | |
| Engine Capacity (Displacement) | 249 ccm (15.19 cubic inches) |
| Engine Type | 1 cylinder |
| Bore x Stroke | Ø70.0 mm x 64.8 mm (Ø2.76 inches x 2.55 inches) |
| Bore/Stroke Ratio | 1.08 |
| Stroke | 4 |
| Valves per Cylinder | 4 |
| Timing System | DOHC |
| Cooling System | Liquid |
| Powertrain | |
| Gearbox | 6 speed |
| Chassis/Suspension/Brakes | |
| Front Brakes | Single disc |
| Rear Brakes | Drum |
| Front Tire | 100/90-19 |
| Rear Tire | 120/90-16 |
| Dimensions | |
| Curb Weight | 133 kg (293 lb) |
| Fuel Capacity | 9 litres (2.38 gallons) |
| Performance | |
| Max Power | 26.00 HP (19.0 kW) at 8500 RPM |
| Power/Weight Ratio | 0.2 Hp/Kg |
| Top Speed | 128 km/h (80mph) |
| Acceleration (dart, speedup) time | |
| 0-100 km/h | 6.6 seconds |
| 0-60 mph | 6.2 seconds |
|
|
- |
|
|
- |
l
全站熱搜
留言列表
